BSF Filtertechniek BV - RMF filter elements (30HB / E26N)

The unique RMF filter elements
The principal of the RMF Systems filters is based on the unique original filter elements. With a filter fineness of 0.5 micron they have the capacity to remove even the smallest of dirt particles from the oil. The micro filter works as a fine filter through which oil passes radially, from the outside to the inside.The filter elements are made entirely of cellulose and are specially designed for hydraulic and lubrication systems.

The use of cellulose as the filtration material has the added benefit that water can be absorbed. Water in oil creates a chemical reaction, which seriously deteriorates the oil.

Original elements

The use of original RMF Systems filter elements will result in extreme fluid cleanliness and low water contamination levels in the fluid. Through a carefully controlled quality control process excellent Δp curves, filter efficiency and dirt holding capacity are secured. Original RMF filter elements are packed in boxes that carry the registered RMF logo.

Applications
The original filter elements are used in combination with RMF Systems filter housings in an endless range of industries. Some examples are: plastic -, steel -, concrete and cement -, petrochemical -, maritime and dredging -, paper -, and forestry industry.

Characteristics
- Continuous quality with stable flow/ Δp performance.
- Extremely fine filters (0.5 micron).
- Large filtration surface.
- High water absorption capacity.
- Additives are not removed.
- Large dirt collection capacity.
- Extends oil usage life.
- Extends life cycle main stream filters.

30 HB filter elements must be used with RMF systems MARK II
Off-line and By-pass filter units (BPU…30 and OLU…30 series).


> Products
RMF filter elements (30HB / E26N) The unique RMF filter elements The principal of the RMF Systems filters is based on the unique original filter elements. With a filter fineness of 0.5 micron they have the capacity to remove even the smallest of dirt particles from the oil. The micro filter works as a fine filter through which oil passes radially, from the outside to the inside.The filter elements are made entirely of cellulose and are specially designed for hydraulic and lubrication systems. The use of cellulose as the filtration material has the added benefit that water can be absorbed. Water in oil creates a chemical reaction, which seriously deteriorates the oil. Original elements The use of original RMF Systems filter elements will result in extreme fluid cleanliness and low water contamination levels in the fluid. Through a carefully controlled quality control process excellent Δp curves, filter efficiency and dirt holding capacity are secured. Original RMF filter elements are packed in boxes that carry the registered RMF logo. Applications The original filter elements are used in combination with RMF Systems filter housings in an endless range of industries. Some examples are: plastic -, steel -, concrete and cement -, petrochemical -, maritime and dredging -, paper -, and forestry industry. Characteristics - Continuous quality with stable flow/ Δp performance. - Extremely fine filters (0.5 micron). - Large filtration surface. - High water absorption capacity. - Additives are not removed. - Large dirt collection capacity. - Extends oil usage life. - Extends life cycle main stream filters. Technical data RMF filter element 30HB 30 HB filter elements must be used with RMF systems MARK II Off-line and By-pass filter units (BPU…30 and OLU…30 series).		RMF Filter element 30HB (MARK II) RMF Systems MARK II RMF Filter element E26N (MARK I) RMF Systems (MARK I)
Ordering code for 30HB elements 1 pcs box (15 pcs) Element specifications Application Flow Max. viscosity Temperature range Collapse pressure Oil compatibility Element construction Filter material Thickness filter material Filtration efficiency Pressure drop Dirt holding capacity Water absorption capacity Integrated by-pass valve End cap material Seal material	OMA...100 OMA...105 By-pass (BPU) and off-line filtration (OLU) 2.1 l/min (average measured value) 180cSt (average measured value) -40 ºC - +120 ºC 14 bar Mineral oils H, HL, HLP/HEPG/ HEES/HETG Cellulose 19 mm ß 0.5 > 200 ± 2.8 bar at 2.1 l/min at 40 cSt ±18 gram ACFTD (average measured value) ± 85 - 150 ml Not mounted in element Silicon (one side) Standard Buna-N, O-ring included
Download documentation 30HB (in pdf): Technical data RMF filter element E26N E26N filter elements must be used with RMF systems MARK I Off-line and By-pass filters (BP…26 and OL…26 series).
Ordering code for E26N elements 1 pcs box 12 pcs Element specifications Application Flow Max. viscosity Temperature range Collapse pressure Oil compatibility Element construction Filter material Thickness filter material Filtration efficiency Pressure drop Dirt holding capacity Water absorption capacity Integrated by-pass valve End cap material Seal material	OMA...120 OMA...125 By-pass (BP) and off-line filtration (OL) 1.6 l/min (average measured value) 120cSt (average measured value) -40 ºC - +120 ºC 12 bar Mineral oil, synthetic esters, rape seed oil etc. Cellulose 19 mm ß2 = 2,330 1.3 bar at 1.6 l/min at 30 cSt 12 gram ACFTD (average measured value) ±70 - 120 ml None No end caps, steel spring Not applicable
Download documentation E26N (in pdf):
Management of Oil Contamination
(c) 2005 BSF Filtertechniek BV