RMF accessoires
RMF offers a wide range of accessoires for its desiccant breathers such as such as spare part kits, air filters, ZR gel, mounting plates, oil demisters and a filter minder.
Spare part kits
The RMF desiccant breathers are fully serviceable with following spare part kits:
RMF spare kit ACM61R
Kit with 100cc Z-R gel, 3µ spin-on air filter KL60, seal and foam filters.
Article number : DKL009253193 (9253193).
RMF spare kit KL93R / ACL93R
Kit with 300cc Z-R gel, 3µ spin-on air filter KL90, seal and foam filters.
Article number : ORM000000655 (9318115).
RMF spare kit KL96R / ACL96R / TDB96R
Kit with 600cc Z-R gel, 3µ spin-on air filter KL90, seal and foam filters.
Article number : ORM000000656 (9318116).
RMF spare kit KL121R / TDB121R
Kit with 1000cc Z-R gel, 3µ spin-on air filter KL120, seal and foam filters.
Article number : ORM000000657 (9318117).
RMF spare kit KL122R
Kit with 2000cc Z-R gel, 3µ spin-on air filter KL120, seal and foam filters.
Article number : ORM000000658 (9318118).
Mounting plates
RMF offers a range of mounting or adaptor plates that can be fitted to hydraulic reservoirs. The mounting plates all have the standard DIN-24557/2 pattern.
KL92 / KL1202 : mounting plates for simple fitting of air conditioner only.
KL95 / KL1205 : mounting plate with additional port for vacuum indicator (Filter Minder).
KL91 / KL1201 : mounting plates with additional porting, connection for suction or return port for RMF offline filter.
KL91SR : mounting plate with additional porting, connection for suction and return ports for RMF offline filter.
Please check documentation for dimensions (download on bottom of this page).
RMF mounting plate KL92
Mounting plate for 93 and 96 series. Made of polyamide. With Buna-N seal.
Article number : ORM000000087 (9317913).
RMF mounting plate KL1202
Mounting plate for 121 and 122 series. Made of polyamide. With Buna-N seal.
Article number : ORM000000089 (9331043).
RMF mounting plate KL91SR
Mounting plate for 93 and 96 series with additional suction and return line connections for offline filter. Made of polyamide. With Buna-N seal.
Article number : RMF009331301 (9331301).
Filter Minder
To monitor the state of the air filter, RMF offers a filter minder (vacuum switch). The filter minder is a combination graduated indicator and switch (N/O), a yellow indicator moves up in the window and locks at the highest air filter restriction. When it reaches the red zone, or highest recommended restriction, it closes a contact and can send a signal to the filter warning light. The locked position at highest restriction must be reset manually. The filter minder can be fitted to a variety of the RMF mounting or adaptor plates.
RMF filter minder
With electrical switch indicator for use with all RMF desiccant breathers. 1/8 NPT – 1/8’’ BSP fitting and dust plug included.
Article number : ORM000000997 (9331303).
Oil Demister
The RMF oil demisters are specially designed to prevent oil mist or fluid migration through air vents. The RMF oil demister consists of an aluminium body with external cooling ribs and can be fitted below the RMF air conditioner or RMF air filter.
Inside this aluminium body a coalescing post is positioned. When migrating oil vapor rises up this post the vapor coalesces into oil droplets which run down the outer diameter of the post and are guided back to tank through holes at the base of the post. In case of excessive splash the oil is contained in the post and runs down the slits in the post and is also returned to the reservoir.
Oil mist
Air vents are used to compensate changes in air volume above the fluid level in gear boxes, hydraulic reservoirs, pump housings etc. High temperatures and thermal expansion cause migration of oil vapors through the air vent, blocking air filters and causing oil spills on machine surfaces. These fluid spills cause both an environmental and safety issue, they are also the cause of shortened air filter life and avoidable fluid consumption. In case of dynamic, volatile gearbox systems not only oil mist can migrate through air vents, but fluid splash can cause extreme fluid migration.
RMF oil demister 140
3/4’’ BSP
Article number : RMF009282378 (9282378).
RMF oil demister 210
3/4’’ BSP
Article number : RMF009282379 (9282379).
All of the above (and more) accessoires can be found in the documentation.
Downloads
Documentation (1.39 MB)