RMF Moisture Content Sensor MCS

The RMF Moisture Content Sensor MCS measures water activity (% RH) and oil temperature in hydraulic and lubrication fluids. The measured values are available on two 4-20mA outputs and one digital output with MODBUS RTU interface.

Online monitoring
Water in hydraulic and lubrication fluids is one of the main causes for oxidation, additive depletion, loss of dielectric strength in insulating oils, corrosion and reduced lubricating film thickness. These expensive problems can be prevented by monitoring the water level of your fluid and taking actions at an early stage.

Accuracy and stability
The RMF Moisture Content Sensor is suitable for most hydraulic and lubricating fluids. The high accuracy of the measurement and excellent long-term stability make the MCS ideal for online monitoring of moisture in transformer, lubricating and hydraulic fluid, as well as diesel fuel.

The MCS is perfectly suitable for long term usage in moisture levels, higher than 90% RH (relative humidity). Making it the perfect solution for gearboxes, thrusters and other applications where free water is a threat.

RMF offers the optimal solution for water contamination problems by combining the MCS with other products like a RMF condition monitoring center or a RMF vacuum dehydration unit.

The compact design and rugged stainless steel housing allow a space-saving installation in the most demanding applications.

RMF Moisture Content Sensor MCS-01-0
Moisture Content Sensor, 1/2″ BSP male, 4-20mA, Modbus.
Article number : DKL009427577 (9427577).

Note: this article is obsolete and replaced by RMF Moisture Content Sensor MCS-01-0-B.

RMF Moisture Content Sensor MCS-01-0-B
Moisture Content Sensor, 1/2″ BSP male, Viton Seal, Analog 4-20 mA, RS-485 MODbus.
Article number : RMF009503324 (9503324).


Documentation (235.19 KB)