Solution for filtration of large oil volumes
Filtration of large oil volumes hydraulic fluids can be a complicated process. RMF Systems has developed a new offline filtration system, the RMF MultiPure. This system is designed to filter large quantities of hydraulic fluids utilising the Radial Micro Filtration technology.
The MultiPure comes as a skid design, combining 12 highly efficient cellulose filter elements in a carbon steel housing. The robust steel pump with integrated safety guarantees a stable flow of the oil. The MultiPure is suitable for almost any industry and will significantly prolong the service life of your oil and equipment.
Severe damage
Most standard fitted system filters contain fibreglass filter elements, which don’t remove particles smaller than 3 micron. Within high pressure hydraulic applications, cluttering of smaller particles can quickly result in the development of varnish, the increase of the TAN value and an significant reduction of the lubrication quality of the oil.
Highly efficient Radial Micro Filtration
The MultiPure applies the Radial Micro Filtration technology. The filter elements in the MultiPure consist of 200 layers of Cellulose, and are especially designed to remove even the smallest particles under low flow and pressure circumstances. Removing these small particles results in significantly cleaner oil, a lower TAN value and the oil will keep its lubrication characteristics. This can result in considerable cost savings, especially with large volumes of hydraulic fluids.
Oxidation
The filter elements in the MultiPure are also capable of removing dissolved water from the hydraulic fluid. Removing both water and metal particles will significantly reduce oxidation of the fluid. The result will be an extended service life of both fluid and system components, less downtime and maintenance and therefore lower costs of ownership.
Condition based maintenance
Additionally the MultiPure can be equipped with a RMF Condition Monitoring Center CMC, providing you with real time status information. The CMC can be outfitted with various sensors, like a particle counter, an oil degradation sensor and a water sensor. The collected data enables you to perform condition based maintenance instead of performing unnecessary maintenance based just on elapsed time.
Download the RMF MultiPure documentation.
Download a case study.
Want to know if the Multipure can be used on your reservoir?
Contact us or call +31 180 62 13 13